低截止频率多倍频程高增益对跖Vivaldi天线北大核心CSCD

针对传统对跖Vivaldi天线的最低截止工作频率较高、增益较低和方向性较差的问题,文中设计了一种新型超宽带对跖Vivaldi天线。融合运用辐射极板开矩形斜槽、加载吸收电阻和寄生矩形贴片等一系列电磁调控措施,扩展了天线的低频工作带宽;采取在天线极板间加载椭圆寄生贴片的技术方式大幅提高了天线的方向性和辐射增益。最后给出了天线的设计流程,从电场分布和表面电流分布的角度揭示了天线的微观工作机制。仿真和实测结果表明:天线的工作频带为0.85~16 GHz(近20倍频程),相对带宽达180%,在3 GHz以上频段增益均超过10 dBi,并且具有较好的端射方向性,在超宽带无线通信、雷达探测、电子对抗和遥感遥测等领域具有广泛的应用前景。     

Fourier transform ion cyclotron resonance mass spectrometry at the true cyclotron frequency

Ion cyclotron resonance (ICR) cells provide stability and coherence of ion oscillations in crossed electric and magnetic fields over extended periods of time. Using the Fourier transform enables precise measurements of ion oscillation frequencies. These precisely measured frequencies are converted into highly accurate mass-to-charge ratios of the analyte ions by calibration procedures. In terms of resolution and mass accuracy, Fourier transform ICR mass spectrometry (FT-ICR MS) offers the highest performance of any MS technology. This is reflected in its wide range of applications. However, in the most challenging MS application, for example, imaging, enhancements in the mass accuracy of fluctuating ion fluxes are required to continue advancing the field. One approach is to shift the ion signal power into the peak corresponding to the true cyclotron frequency instead of the reduced cyclotron frequency peak. The benefits of measuring the true cyclotron frequency include increased tolerance to electric fields within the ICR cell, which enhances frequency measurement precision. As a result, many attempts to implement this mode of FT-ICR MS operation have occurred. Examples of true cyclotron frequency measurements include detection of magnetron inter-harmonics of the reduced cyclotron frequency (i.e., the sidebands), trapping field-free (i.e., screened) ICR cells, and hyperbolic ICR cells with quadrupolar ion detection. More recently, ICR cells with spatially distributed ion clouds have demonstrated attractive performance characteristics for true cyclotron frequency ion detection. Here, we review the corresponding developments in FT-ICR MS over the past 40 years.     

高速纺纱锭子弹性管减振机制与振动特性

为探究锭子弹性管的减振机制,将其开螺旋槽部分作为矩形弹簧模型处理,建立了减振弹性管的抗弯刚度及底部振幅的理论数学模型,并利用MatLab仿真分析了减振弹性管关键结构参教与其抗弯刚度和底部振动特性的耦合关系,同时结合有限元仿真及模态测试得到弹性管各阶固有频率。研究结果表明:随着槽宽和圈数的增大,刚度降低,底部振幅增加;随着壁厚、螺距、螺旋升角、弹性模量的增大,刚度增加,底部振幅降低;弹性管固有频率和锭子系统共振频率区间一致,且工作频率有效避开了共振频率。     

庞庞塔煤矿综采工作面恒压供液系统研究

结合庞庞塔煤矿综采工作面的具体应用现状,设计了变频驱动控制的恒压供液系统。在泵出口管道中设置压力传感器、流量计等,同时在每台液压支架乳化液入口处安装一个蓄能器。压力、流量等数值由各种传感器来进行采集,并把监测到的数据反馈给PLC控制器。PLC控制器通过把传感器送来的数据和系统预设好的数值进行比较来判断供液系统是否需要加压或着减压,以此通过变频器来改变电机的转速,以实现供液系统维持恒压状态。     

SC15/182F分体式电驱梭车的研制及应用

梭车是短壁机械化开采技术的重要运输设备。简要介绍了现有梭车的现状及应用局限,详细阐述了分体梭车的主要设计思路,重点介绍了薄壁分体式机架的结构特征,阐述了分体梭车在模块化卷电缆装置、四象限变频驱动等方面的技术升级,并介绍了分体梭车在国内矿区的应用情况。     

A multi-tone central divided difference frequency tracker with adaptive process noise covariance tuning

The problem of real-time frequency estimation of nonstationary multi-harmonic signals is important in many applications. In this paper, we propose a novel multi-frequency tracker based on a state-space representation of the signal with Cartesian filters and the second-order central divided difference filter (CDDF), which improves the performance of the extended Kalman filter (EKF) by using Stirling's interpolation method to approximate the mean and covariance of the state vector. A crucial element of the method is the adaptive scaling of the process noise covariance matrix appearing in the filter equations, as a function of the innovation sequence, which tunes the accuracy-reactivity trade-off of the filter. The proposed solution is evaluated against two approaches from the literature, namely the factorized adaptive notch filter (FANF) and the extended Kalman filter frequency tracker (EKFFT). Several experiments emphasize the estimation accuracy of the proposed method as well as the improved robustness with respect to initial errors and input signal complexity. The presented method appears to be particularly efficient with rapidly varying frequencies, thanks to the update mechanism that adjusts the filter parameters based on the amplitude of the estimation error.     

变截面Z型折叠机翼振动特性的有限元与实验分析

Z型变截面折叠机翼作为一种可变体机翼结构,不同的折叠角对机翼稳定性有着重要的影响,因此研究不同折叠角度下的特性参数对机翼动态稳定性有着重要的意义.本文首先设计加工了Z型变截面可折叠机翼结构的实验模型,通过建立与实验模型相匹配的有限元模型,仿真得到不同折叠角度下机翼的前5阶固有频率和振型,针对不同折叠角度下机翼的固有特性,通过扫频实验得到机翼前5阶固有频率和模态振型,以及横向外激励作用下三段翼的频响曲线,对比分析有限元仿真与实验结果,验证结果的可靠性,这将对机翼结构设计以及特性参数的选取提供参考依据.     

应用PMO提高连铸坯生产拉速及成分均匀性

为了实现电炉厂提产增效的目标,研究了脉冲磁致振荡(PMO)在提高铸坯生产拉速中的应用潜能。结果表明,优化PMO处理参数可以适应生产拉速提高的要求,并改善铸坯的中心偏析和宏观偏析。当连铸拉速提至1.05 m/min,PMO脉冲频率为1.16K_f Hz,峰值电压为1.00K_iV处理参数(K_f和K_i分别为仪器的放电频率和电压峰值)时, 铸坯横断面碳偏析指数可控制在1±0.05内;当连铸拉速提至1.15 m/min,PMO脉冲频率为1.28K_fHz,峰值电压为1.00K_iV处理参数时,铸坯横断面碳偏析指数可控制在1±0.07内。试验证明,在高拉速条件下通过保证单位时间内对钢液施加的脉冲能量可以使连铸坯质量得到有效改善。     

Enhanced electrical and photoluminescence properties of BiSbO4-doped CaCu3Ti4O12 ceramics by modifying grain boundary response

CaCu₃Ti₄O₁₂-xwt%BiSbO₄ ceramics (CCTO-xwt%BSO, x = 0, 1, 2, 3) were prepared by solid-state reaction method. The microstructure, dielectric properties, varistor properties, photoluminescence properties of CCTO-xwt%BSO ceramics were studied in this work. Results showed that all samples formed CaCu₃Ti₄O₁₂ (CCTO) single phase. Doping BiSbO₄ (BSO) restrained the abnormal grain growth and increased the grain boundary density of ceramics. The introduction of BSO led to the increase of the grain boundary resistance, reducing the dielectric loss and enhancing the temperature stability of dielectric properties. The nonlinear electrical characteristics are enhanced with proper concentration of BSO. And the improved varistor performance with breakdown electric field of ～3.98–34.6 and nonlinear coefficient of ～1.49–2.96 are obtained for CCTO-xwt%BSO samples. In addition, the photoluminescent emission of the samples is enhanced with the addition of appropriate equivalent BSO, showing the potential applications in novel devices with photoluminescent/electrical multifunctional properties.     

炼铁-炼钢界面布局紧凑模式

论述了炼铁-炼钢界面的紧凑衔接技术,涉及多维物质流的衔接、传递、匹配及缓冲等过程。从各角度综合分析得出,该界面衔接布置紧凑,占地面积小,实施MES系统的“在线铁水罐跟踪系统”使炼铁-炼钢界面减少了铁水罐周转个数,相对传统方式的铁水包输运方式,保温剂使用量平均减少了0.483 kg/t(铁),铁水入炉温度提高约60 ℃。同时,确保了100%的“一罐到底”命中率,大幅节省了耐材费用,具有显著的经济效益和社会效益。